Zurücksetzen in den Auslieferungszustand

1. Remove the device from the wall bracket by pressing the release mechanism in the direction of the arrow.

It is not necessary to remove the batteries.
2. Press the button and keep it pressed for at least another 10 seconds. The LED will light up continuously during this period (if the LED does not light up, the batteries are dead and must be replaced).
3. After around 10 seconds, the LED will flash five times. Release the button.
4. The device has now been reset and can be integrated again via the software using the search mode.
5. The device has now been reset and can be integrated again via the software using the search mode.