Integrate in SmartHome

Prerequisite:  Ensure that the Robolinho was commissioned as described in the accompanying instructions from AL-KO and is ready for operation. Check that the enclosed receiving unit with the Lemonbeat protocol is connected to the central unit.

To integrate the Robolinho into your SmartHome, proceed as follows:

  1. Press the MENU button on the Robolinho and under Settings select the sub-item inTOUCH. Confirm disconnection and conclude the process by pressing OK.

  2. Open your SmartHome using the app or a browser.

  3. Click the “+” symbol on the top right and select “Add device”. If the Robolinho is not displayed, go to “Select device” and select the navigation item “Robots“.

  4. Click on Robolinho and follow the subsequent steps.

      If the device is still not found, switch the Robolinho off and wait 15 seconds before switching it on again. Repeat steps 1 to 4.