Resetting the device to factory settings

1. Using a flat-bladed screwdriver and working from the side, carefully prise the rocker out of the rocker adapter.
2. Use a narrow object (e.g. ballpoint pen) to press the setup/reset button and keep it pressed for at least 5 seconds. The LED will light up continuously during this period.
3. After around 5 seconds, the LED will flash five times. Then release the setup/reset button.
4. The device has now been reset and can be re-integrated in the software using search mode.
5. If the device symbol remains greyed out after the device has been integrated, press the setup/reset button again to complete the process.
6. Then place the rocker back on the rocker adapter.