Resetting the device to factory settings

1. Using a flat-bladed screwdriver and working from the side, carefully prise the rocker out of the rocker adapter.
Do not remove the inwall device from the box.
2. Use a narrow object (e.g. ballpoint pen) to press the setup/reset button and keep it pressed for at least 5 seconds. The LED will light up continuously during this period.
3. After approximately 5 seconds, the LED briefly flashes five times. Release the setup/reset button.
4. The device has now been reset and can be integrated again via the software using the search mode.
5. If the device symbol remains greyed-out after it has been integrated into a room, please press the setup/reset button again to complete the procedure.
6. Then place the rocker back on the rocker adapter.