Resetting the device to factory settings
To reset the device, proceed as follows:
| 1: | Using a flat-bladed screwdriver and working from the side, carefully prise the rocker out of the rocker adapter.
Do not remove the inwall device from the box. |
|
2: |
Use a narrow object (e.g. ballpoint pen) to press the setup/reset button and keep it pressed for at least 5 seconds. The LED will light up continuously during this period. |
| 3: | After approximately 5 seconds, the LED briefly flashes five times. Release the setup/reset button. |
| 4: | The device has now been reset and can be integrated again via the software using the search mode. |
| 5: | If the device symbol remains greyed-out after it has been integrated into a room, please press the setup/reset button again to complete the procedure. |
| 6: | Then place the rocker back on the rocker adapter. |
