Resetting the device to the factory settings
When resetting to the factory settings, all settings will be lost.
|1.||Remove the installed indoor siren from the wall bracket.|
|2.||Press and hold the button next to the “Config” label for at least four seconds. The signal light will start to flash red slowly.|
|3.||Press the button again for at least 4 seconds. The signal light will then start to flash red more quickly.|
|4.||Release the button to complete the process.|
If, after four seconds of pressing, the signal light does not flash but is permanently lit red, the siren cannot be reset manually. In this case, contact the technical hotline.